Perfluorinated rubber Tetrapropyl fluoride rubber Neoprene rubber Ethylene-propylene rubber Chlorol rubber Butyl rubber Nitrile butadiene rubber Vinyl acrylic rubber Polyurethane rubber Fluorine rubber Hydrogenated nitrile butadiene rubber Fluorosilicone rubber Silicone rubber PTFE RPTFE German yellow nylon PEEK PCTFE POM
Fluorine rubber is an elastic polymer with fluorine atoms attached to carbon atoms in the main chain or side chain, which is obtained by polymerization or condensation of fluorine monomer. Because of the different fluorinated monomers used in manufacturing, fluorinated rubber has many varieties, which can be divided into fluorinated olefin copolymers and nitroso copolymers. Specifically, according to the chemical composition can be divided into fluorene by fluorine rubber, fluorine silicone rubber, nitroso fluorine rubber, fluorinated acrylic rubber, phosphonitrile fluoride rubber, fluorine ether rubber and so on. Fluorine rubber has the characteristics of high temperature resistance, oil resistance and corrosion resistance of a variety of chemicals. It is an indispensable material for modern aviation, missiles, rockets, space navigation and other cutting-edge science and technology. In recent years, with the continuous improvement of reliability, safety and other requirements of the automobile industry, the use of fluorine rubber in the automobile has also increased rapidly.
Temperature range: -45℃ ~ 204℃
Advantages:
Excellent chemical stability, resistant to most oils and solvents, especially various acids and aliphatic hydrocarbons
Aromatic hydrocarbons and animal and vegetable oils
· Excellent high temperature resistance
· Good aging resistance
· Excellent vacuum performance
· Excellent mechanical properties
· Good electrical performance
· Good permeability
Disadvantages:
· It is not recommended for ketones, low molecular weight esters and nitro-containing compounds
· Poor performance at low temperature
· Poor radiation resistance
Applicable media:
· Mineral oil, ASTM No.1 oil IRM902 oil and 903 oil
· Non-combustible HFD hydraulic fluid
· Silicone oil and silicone ester
· Mineral, vegetable oil and fat
· Aliphatic hydrocarbons (butane, propane, natural gas)
· Aromatic hydrocarbons (toluene, xylene)
· Chlorinated hydrocarbons (trichloroethane, carbon tetrachloride)
· Gasoline (including high-alcohol gasoline)
· High vacuum
Not suitable for media:
· Glycol-based brake fluid
· Ammonia, amine and base
· Superheated water vapor
· Low molecular weight organic acids (formic acid and acetic acid)
Compyriht2023© Suzhou Diwei Sealing Technology Co., Ltd ALL Rights Reserved.